The old and the new

Thank you for joining us for the Atlas Boatworks 2024 recap! This year, we embraced new beginnings and let go of some old traditions.

In February, we purchased the molds for the Atlas Boatworks 23F, a flatback-inspired bay boat, and carried on the legacy of the original team that created them.

Over the next six months, we redesigned and updated various aspects of the boat, including its design, materials, and construction processes. We used those updates and built our 2024 demo boat which we have toured all over the Southeast US. 

Join us as we take a largely photographic journey down memory lane to recap an exciting 2024 at Atlas Boatworks.

Atlas Boatworks 23F bay boat docked at the Edgar C Glenn Boat Ramp
Demo day in Bluffton, SC
A gelcoat machine sits in front of a boat mold.
Gelcoat for the demo boat in the mold
A boat hull hangs above the mold
Demo boat gets pulled from the mold
The stringer system of a fishing boat is shown
Stringers are installed
White gelcoat is sprayed onto the mold of a deck cap for the Atlas Boatworks Demo Boat
Gelcoat gets sprayed into the cap mold
Atlas Boatworks 23F bay boat with foam decking under gunwales
Finished deck with Dura Deck foam installed under the gunnels
Hatch on a boat deck
Deck hatch gets installed and faired in
Wires coiled on the deck of an Atlas Boatworks 23F bay boat during the rigging process
Wires are laid out and ready to be pulled through the rigging tubes
Non-skid is sprayed on a boat deck and waiting to cure
Nonskid sprayed on the deck
Rub rail is partially installed on an Atlas Boatworks 23F bay boat
Rub rail is installed
Overhead view of the Atlas Boatworks 23F bay boat
Overhead view of the completed demo boat
rear hatch on Atlas Boatworks 23F
Transom hatch is fully removable for easy access
Atlas Boatworks 23F idles away from a colorful sunset
Sunset at New Pass, FL
Four fishing rods stand in holders on the console of the Atlas Boatworks 23F bay boat
Rod holders
Sunrise overlooking the docks at Lover's Key State Park
Demo day in Ft Myers, FL
A child holds a false albacore near the camera
False Albacore fishing in Wrightsville Beach, NC
Two Atlas Boatworks 23F bay boats sit next to each other on trailers
Meetup with another Atlas Boatworks owner
an Atlas Boatworks 23F bay boat idles in front of the Sanibel, FL lighthouse
Demo day in Sanibel, FL

What does 2025 hold?

In 2025 we are going to continue the momentum we started in 2024. We have a new 2025 demo boat just fresh out of the mold and are making the rigging decisions on it as we speak. We have the new updated deck and hatches to debut and a fully closed transom with a new drainage system. These will all be highlighted on our walk through of our 2025 demo boat. We are excited to share those with you over the next few months. 

Comments are closed.