More Decking In this post, we are continuing the discussion on the building of the deck and hatches on the Atlas Boatworks 23F bay boat. If you missed the last post where we started the conversation, you can find it here. Deck Fitting Since there was no existing mold for […]

Deck the Halls In this post we cover the building of the deck for our Atlas Boatworks 23F center console bay boat. If you’ve missed the previous posts, we’ve covered all the steps that have gotten us here, from the hull to the stringers and more. Check out the previous […]

Under Your Feet In this post, we will discuss the stringer system in our 2024 demo boat. The stringers are essential for the boat’s structure and provide support for the surface you stand on. If you haven’t been following along, you can catch up on our journey by reading our […]

Adding Value In this post, we continue our series on building the 2024 Atlas Boatworks demo boat. We’re covering the owner’s manual that accompanies your Atlas Boatworks 23F center console fishing boat. If you missed any of the previous posts, you can find them here on our blog. Many jokes […]

Giddy Up! Welcome to a post on the center console layout on our 2024 Atlas Boatworks 23F demo boat. This is the next installment in our ongoing series about the building of our demo boat. If you’ve missed any of the previous posts you can see them here.  In this […]

And…we’re off! Picking up where we left off last time, we are going to delve into the world of small parts. The Atlas Boatworks 23F is a pretty simple boat by design. We’ve worked hard to make sure that you don’t have a ton of parts so the boat is […]

Keepin’ On Alright, as promised in our last post, we are continuing the journey of our 2024 demo boat by talking about the different types of fiberglass that we have used. If you missed that post then back up the bookmobile and go back here and check it out.  There […]

Next Steps Welcome back! We are walking, step-by-step, through the building of our 2024 Atlas Boatworks 23F demo boat. Last week we talked about the skin coat. If you missed that, throw it in reverse and go back here and read that. This week we are going to dive into […]

Next Steps Thanks for joining us again for the building of our Atlas Boatworks 2024 demo boat. In our last post, we talked about choosing the hull color (We went with white; see why here) and then spraying that color gelcoat into the mold. If you missed that post, go […]