Engine Performance In this post, we are going to talk about the engine performance of the Tohatsu 140hp on our Atlas Boatworks 23F bay boat. This is one of the crowning moments of our cataloging the build of our demo boat. If you’re unsure how we got here, this post […]

The Fun Part The best part of a custom boat is the custom part. In this post, we will walk through all of the build options and customizations we chose for the Atlas Boatworks 23F 2024 demo boat. If you have no idea how we got here, check out our […]

Hull Reveal In this post, we will cover the process of removing the hull of the Atlas Boatworks 23F bay boat from the mold. You can think of the mold in the same way you would a bread pan or muffin tin. The ingredients go on the inside and then […]

More Decking In this post, we are continuing the discussion on the building of the deck and hatches on the Atlas Boatworks 23F bay boat. If you missed the last post where we started the conversation, you can find it here. Deck Fitting Since there was no existing mold for […]

Deck the Halls In this post we cover the building of the deck for our Atlas Boatworks 23F center console bay boat. If you’ve missed the previous posts, we’ve covered all the steps that have gotten us here, from the hull to the stringers and more. Check out the previous […]

Under Your Feet In this post, we will discuss the stringer system in our 2024 demo boat. The stringers are essential for the boat’s structure and provide support for the surface you stand on. If you haven’t been following along, you can catch up on our journey by reading our […]

Adding Value In this post, we continue our series on building the 2024 Atlas Boatworks demo boat. We’re covering the owner’s manual that accompanies your Atlas Boatworks 23F center console fishing boat. If you missed any of the previous posts, you can find them here on our blog. Many jokes […]

Giddy Up! Welcome to a post on the center console layout on our 2024 Atlas Boatworks 23F demo boat. This is the next installment in our ongoing series about the building of our demo boat. If you’ve missed any of the previous posts you can see them here.  In this […]

And…we’re off! Picking up where we left off last time, we are going to delve into the world of small parts. The Atlas Boatworks 23F is a pretty simple boat by design. We’ve worked hard to make sure that you don’t have a ton of parts so the boat is […]

Keepin’ On Alright, as promised in our last post, we are continuing the journey of our 2024 demo boat by talking about the different types of fiberglass that we have used. If you missed that post then back up the bookmobile and go back here and check it out.  There […]